Our company currently has card-making molds; non-standard cards (special-shaped cards) are exempt from mold fees

    Good news! Some friends need to make special-shaped cards (non-standard cards), but many manufacturers charge mold fees. Some customers are unwilling to pay this mold fee. Now, our company has ready-made molds, which can help you avoid these troubles.

    Generally, mold fees must be charged because mold opening is required to fix the card's shape, and mold opening incurs a mold fee. This increases costs. If you have a ready-made mold, you can significantly reduce costs. Some of our company's molds are as follows; please choose the best one! Production according to the specified mold. If you are not satisfied with the mold, you can contact Manager Liu.

    Cards with irregular shapes can be called non-standard cards.
    Geometric cards such as rectangles, squares, triangles, and elliptical shapes are called "non-standard cards"
    Special-shaped cards shaped like animals or dolls are called "quasi-alien cards."
    Non-standard cards are made by packaging chips in ABS housings or materials such as PCV, coils filled with epoxy resin, and combined by ultrasonic welding to create various shapes of special-shaped cards. You can choose from EM, MF, TMIC, ATMEL, ST, and TK series chips.
Relatively speaking, the manufacturing process for "quasi-irregular cards" is more difficult than that of geometric shapes. Common non-standard cards mainly have two uses: one is for badge cards, which vary greatly in size depending on customer requirements. The smallest size ranges from 20mm × 40mm, which is more fitting as badges, and the largest 90mm × 130mm. Additionally, they are used for access control cards, which can be made into dozens of shapes such as keychain cards, coin cards, and crystal cards. Like the remote control on a car, it's modern and stylish.

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23: