Instructions for customer order drafts
2013-09-21 · The manuscript should have enough bleeding spots and the dimensions must be standardized. For non-standard drafts, our factory may deform the pattern during size adjustment (bleed size: 88.5*57MM, finished product size: 85.5*54MM).
Instructions for customer order drafts
1: Size
The manuscript should have enough bleeding spots and the dimensions must be standardized. For non-standard drafts, our factory may deform the pattern during size adjustment (bleed size: 88.5*57MM, finished product size: 85.5*54MM).
2: Quantity
You must clearly note the number of pages per page. You can't add up the total number of several editions.
3: Thickness
The standard thickness is 0.76MM. If not specified, it is considered standard. If it is a special thickness, be sure to specify it clearly
4: Bump code
The embossed numbers must be clearly marked with large and small, and whether they are hot stamped in gold or silver; otherwise, the default is a small embossed number, and the gold foil embossed numbers start from which number is listed. If there are numbers you don't want or NO, if you don't have any notes, start from the manuscript number. For vertical cards, the convex numbers should be on the big side, not on the small side, and not vertical.
Small convex code reserved slot: width 1iTAIul, height one digit HINN. Large convex code slot: width Milh, height MlI one digit. Spaces and letters also count as one digit. If there aren't enough convex numbers to reserve, our factory defaults to the actual convex size and directly typed it. The margin between the top, bottom, left, and right cards should be at least MiM; if the margin is insufficient, Our factory defaults to normal margins.
5: If the signature bar has no text, it defaults to white; if it does, it is transparent. If you want to specify the manuscript color, please specify specifically.
6: Magnetic stripe draft standard: height 12MM, edge spacing to finished product 4MM. The process requirements require remarks indicating magnetic stripes; otherwise, our factory defaults to printing in black, and if magnetic printing is required, please note it as well. Otherwise, our factory default is not to write to the magnet. Our factory provides free magnetic writing. Because operators write magnetic data very quickly, some cards may not have magnetic input or incorrect numbers. We are not responsible for any arising issues arising from this.
7: The barcode must indicate the model type, whether it is exposed or concealed, the numbering order, whether the barcode is printed or sprayed, and the printed barcode should only be printed on a white background. Barcode slot retention standard: width 35MM for digits below 8, height 12MM; for digits above 8, push in order. If it is not specified as a barcode, it will be printed directly. If no model is specified, the default is to print 128 clear type
8: Inkjet code labeling slot retention standard: height 8MM, width 3MM, minimum empty space 8*24MM; if exceeded, the above will be calculated according to previous regulations. Silk glue should indicate whether the base is silver or gold; if not specified, just print the label directly. Whether to play the entire page or part of it, unless specified, the entire page is played. Whether it's heads or tails should be used as a base; if not specified, both sides are used. Whether to remove the background color; if not specified, it will not be removed. Is the white part a base color or a white accent? If not fully annotated, he would swallow the underlying grief. Gold foil L-silver foil gold or silver foil content must be in the arrow format, not image format; otherwise, it cannot be stamped. The content to be stamped, as well as whether gold, silver, laser gold, or silver are to be specially specified; otherwise, our factory will default to printing according to the color of the draft
Since our factory accepts orders at nearly cost-effective ex-factory prices, small profits must rely on multiple orders to survive, and it is impossible to spend a lot of time cross-checking each order one by one. Therefore, customers are requested to write remarks according to these process requirements when placing orders. Our factory will not alter any documents and will produce directly according to the customer's order documents. If the remarks are unclear, our factory will produce according to default. Any losses arising from this are unrelated to our factory.
1: Size
The manuscript should have enough bleeding spots and the dimensions must be standardized. For non-standard drafts, our factory may deform the pattern during size adjustment (bleed size: 88.5*57MM, finished product size: 85.5*54MM).
2: Quantity
You must clearly note the number of pages per page. You can't add up the total number of several editions.
3: Thickness
The standard thickness is 0.76MM. If not specified, it is considered standard. If it is a special thickness, be sure to specify it clearly
4: Bump code
The embossed numbers must be clearly marked with large and small, and whether they are hot stamped in gold or silver; otherwise, the default is a small embossed number, and the gold foil embossed numbers start from which number is listed. If there are numbers you don't want or NO, if you don't have any notes, start from the manuscript number. For vertical cards, the convex numbers should be on the big side, not on the small side, and not vertical.
Small convex code reserved slot: width 1iTAIul, height one digit HINN. Large convex code slot: width Milh, height MlI one digit. Spaces and letters also count as one digit. If there aren't enough convex numbers to reserve, our factory defaults to the actual convex size and directly typed it. The margin between the top, bottom, left, and right cards should be at least MiM; if the margin is insufficient, Our factory defaults to normal margins.
5: If the signature bar has no text, it defaults to white; if it does, it is transparent. If you want to specify the manuscript color, please specify specifically.
6: Magnetic stripe draft standard: height 12MM, edge spacing to finished product 4MM. The process requirements require remarks indicating magnetic stripes; otherwise, our factory defaults to printing in black, and if magnetic printing is required, please note it as well. Otherwise, our factory default is not to write to the magnet. Our factory provides free magnetic writing. Because operators write magnetic data very quickly, some cards may not have magnetic input or incorrect numbers. We are not responsible for any arising issues arising from this.
7: The barcode must indicate the model type, whether it is exposed or concealed, the numbering order, whether the barcode is printed or sprayed, and the printed barcode should only be printed on a white background. Barcode slot retention standard: width 35MM for digits below 8, height 12MM; for digits above 8, push in order. If it is not specified as a barcode, it will be printed directly. If no model is specified, the default is to print 128 clear type
8: Inkjet code labeling slot retention standard: height 8MM, width 3MM, minimum empty space 8*24MM; if exceeded, the above will be calculated according to previous regulations. Silk glue should indicate whether the base is silver or gold; if not specified, just print the label directly. Whether to play the entire page or part of it, unless specified, the entire page is played. Whether it's heads or tails should be used as a base; if not specified, both sides are used. Whether to remove the background color; if not specified, it will not be removed. Is the white part a base color or a white accent? If not fully annotated, he would swallow the underlying grief. Gold foil L-silver foil gold or silver foil content must be in the arrow format, not image format; otherwise, it cannot be stamped. The content to be stamped, as well as whether gold, silver, laser gold, or silver are to be specially specified; otherwise, our factory will default to printing according to the color of the draft
Since our factory accepts orders at nearly cost-effective ex-factory prices, small profits must rely on multiple orders to survive, and it is impossible to spend a lot of time cross-checking each order one by one. Therefore, customers are requested to write remarks according to these process requirements when placing orders. Our factory will not alter any documents and will produce directly according to the customer's order documents. If the remarks are unclear, our factory will produce according to default. Any losses arising from this are unrelated to our factory.
Request a quote
Get a quote plan
Just state your usage scenario and we can provide you with a quote! Thank you for your cooperation!