Some important questions about membership card production
2013-09-24 · We know that the standard for making membership cards is 85.5*54mm, which is length and width, so the typical thickness is 0.76mm, which is the most basic knowledge. Also, for the four rounded corners of membership cards, we usually set the curvature smoothness to 12. There are also some other issues, so I've listed a table as well.
Some important questions about membership card production
We know,Membership card productionThe standard is 85.5*54mm, which is length and width, so the typical thickness is 0.76mm, which is the minimum knowledge. Also, membership cards have four rounded corners, which we usually set to fillet, curvature, smoothness to 12. There are also some other issues, so I've listed a table as well.
1. Standard membership card production dimensions:
Membership card size: 88.5×57mm (each side includes 1.5mm bleeding slots);
2. Standard Size of the Finished Membership Card:
The finished size of the membership card is 85.5×54mm; Please specify the size when ordering special-shaped cards;
3. Membership card formatting methods:
When formatting membership cards, please place text and other content within 3mm of the cutting line for a more attractive appearance after trimming;
4. Membership Card Style:
When making membership cards, pay attention to the distance from the raised code to the edge at 3mm; The distance from the magnetic stripe to the edge is 4mm, and the magnetic strip width is 12mm;
5. Membership Card Creation Software:
Our company accepts files created by Coreldraw, Illustrator, Freehand, and Photoshop software tools; Text should be converted to curves or outlined text; Shangtai
6. Membership Card Format Requirements:
1. Please save CorelDraw in CDR format (for graphics using CorelDraw effects, please convert them to bitmaps, with a bitmap resolution of 350dpi).
2. Freehand and Syntech Illustrator should be saved in EPS format (external image files must be attached);
3. Please save Photoshop in TIF or JPG format, with a file resolution of at least 350dpi.
8. If the line is below 0.076mm, the print will not be visible; the size must be set to no less than 0.076mm.
9. The color setting value must not be lower than 8% to avoid color failure to appear.
10. For files created with Photoshop, the membership card size should be 88.5×57mm, and the front and back sides should be stored separately.
11. Color Description:
1. Do not use the color of the screen or print to determine the printing color. Do not use spot colors when filling the color. When making the color, always refer to the CMYK color value % when making the color. Otherwise, any color differences will not be returned.
2. The same file may show slight color differences across different printing runs, such as coffee, dark green, and deep purple, which are more likely to cause color shifts, which is normal.
3. Do not use C:100, M:100, Y:100, or K:100 four-color fills for black text. Large color blocks with a total value exceeding 250% are prone to backstaining (sticking patterns) during printing.
We know,Membership card productionThe standard is 85.5*54mm, which is length and width, so the typical thickness is 0.76mm, which is the minimum knowledge. Also, membership cards have four rounded corners, which we usually set to fillet, curvature, smoothness to 12. There are also some other issues, so I've listed a table as well.
1. Standard membership card production dimensions:
Membership card size: 88.5×57mm (each side includes 1.5mm bleeding slots);
2. Standard Size of the Finished Membership Card:
The finished size of the membership card is 85.5×54mm; Please specify the size when ordering special-shaped cards;
3. Membership card formatting methods:
When formatting membership cards, please place text and other content within 3mm of the cutting line for a more attractive appearance after trimming;
4. Membership Card Style:
When making membership cards, pay attention to the distance from the raised code to the edge at 3mm; The distance from the magnetic stripe to the edge is 4mm, and the magnetic strip width is 12mm;
5. Membership Card Creation Software:
Our company accepts files created by Coreldraw, Illustrator, Freehand, and Photoshop software tools; Text should be converted to curves or outlined text; Shangtai
6. Membership Card Format Requirements:
1. Please save CorelDraw in CDR format (for graphics using CorelDraw effects, please convert them to bitmaps, with a bitmap resolution of 350dpi).
2. Freehand and Syntech Illustrator should be saved in EPS format (external image files must be attached);
3. Please save Photoshop in TIF or JPG format, with a file resolution of at least 350dpi.
7. Please set the color mode for membership card creation files to C.M.Y.K mode.
8. If the line is below 0.076mm, the print will not be visible; the size must be set to no less than 0.076mm.
9. The color setting value must not be lower than 8% to avoid color failure to appear.
10. For files created with Photoshop, the membership card size should be 88.5×57mm, and the front and back sides should be stored separately.
11. Color Description:
1. Do not use the color of the screen or print to determine the printing color. Do not use spot colors when filling the color. When making the color, always refer to the CMYK color value % when making the color. Otherwise, any color differences will not be returned.
2. The same file may show slight color differences across different printing runs, such as coffee, dark green, and deep purple, which are more likely to cause color shifts, which is normal.
3. Do not use C:100, M:100, Y:100, or K:100 four-color fills for black text. Large color blocks with a total value exceeding 250% are prone to backstaining (sticking patterns) during printing.
Request a quote
Get a quote plan
Just state your usage scenario and we can provide you with a quote! Thank you for your cooperation!