What are the common process steps for making membership cards?

    First, design the card's layout, designing the card's appearance and manufacturing process. The main aspects of card design are as follows. CommonMembership card productionWhat are the process flows?

    1. Notes on card barcodes: When designing barcodes, make sure the background color where the barcode is stamped must be white. For offset printing colors, hollowed-out and back-to-white must be used, and for gold and silver backgrounds, hollowed-out areas are required to be used for barcodes. Also, the size of the barcode position depends on the number of digits; if there are more digits, leave them wider to facilitate reading and writing.

    2. Card design design: Common design software includes CorelDRAW, Photoshop, etc., and vector graphics creation software is commonly used, as this results in clearer and more attractive card printing.

    3. Pay attention to card size. The finished card size is 85.5*54mm. When designing files, you need to design the finished product dimensions. Most importantly, the key, text, and logo shown on the card must be within the finished card, and at least 3mm from the card edge.

    4. Distribution of convex codes: small convex is size 12, large convex is size 18; the variation of convex code should reach 4.5-5mm or more.

    5. Magnetic stripe width considerations: Pay special attention to the position of magnetic stripes. The width of the magnetic strip is 12.5mm, and the mounting position should be 4.5mm from the clip edge. Pay special attention when designing documents.