How to prevent the membership card from being smudged during printing

How to prevent the membership card from being smudged during printing
    First, we should knowMembership card productionWhat are the process steps? Next, determine how to avoid plate paste during printing. First, we know that after receiving the membership card design draft, kefilin is first needed, then plate-making is done through CTP, followed by lamination, followed by other downstream processes. The same logic applies to other printed products. First, we need to understand the production process so that we can prevent accidents through this process.
    From the above analysis of the membership card production process, it is clear that there is a step called lamination. So what exactly is glue on the plate? Glue refers to the use of a whole block of large material glue plate. The cause lies in the lamination stage, because the lamination stage requires hot pressing first, and after hot pressing, cold pressing continues. If workers do not master this process, it is easy to cause plate pasting. Therefore, to avoid gluing the plate during the printing process, The most important step is lamination, which can be considered the core factor in the quality of membership card production.