Parking cards, parking card production, parking card design and printing
A parking card is a type of card used by every parking lot. It generally uses contactless IC technology and is mainly used to record vehicle entry and exit and charge fees. It can realize one card, one vehicle, allowing vehicles to enter and exit with the card, and to perform timed charging for vehicles entering and exiting with the card.
.jpg)
Parking cards, parking card production, parking card design and printing
Introduction to parking cards
A parking card is a type of card used by every parking lot. It generally uses contactless IC technology and is mainly used to record vehicle entry and exit and charge fees. It can realize one card, one vehicle, allowing vehicles to enter and exit with the card, and to perform timed charging for vehicles entering and exiting with the card. Cardholders hold parking cards, making it convenient to enter and exit parking, record charges, and facilitate parking lot management. Parking cards generally use ID chips and IC chips, which are currently the most common and mature types of cards in use. Which chip should be used? Depending on whether the reader supports an IC chip or an ID chip.
Technical parameters of the parking card
Storage capacity: 8Kbit, 16 partitions, two passwords per partition
Operating frequency: 13.56 MHz
Communication rate: 106KBoud
Read/write distance: 2.5~10cm
Read/write time: 1~2ms
Operating temperature: -20°C~55°C
Erase and writing lifespan: > 100,000 cycles
Data retention: > 10 years
Dimensions: ISO standard card 85.6x54x0.82
Packaging materials: PVC, PET, PETG, 0.13mm copper wire
Packaging process: Ultrasonic automatic wire placement / automatic contact welding
Standard: ISO14443A
Scope of application for parking cards
This product is widely used in residential communities, property management, buildings, shopping malls, supermarkets, department stores, hospitals, gardens, museums, specialized parking lots, and more.
Parking card production process
1. Collect the customer's parking card design documents, or design them according to the customer's requirements (the design documents are generally in CDR9 format)
2. Before placing the order, the merchandiser prepares a parking card order confirmation document and submits it to the customer for verification. Only after verification can the order be placed and production proceed.
3. Parking cards are removed from the film by row and handed over to the offset or screen printing department to print the large size of the parking cards.
4. Combine the printed large front and back of the parking card print.
5. Cut the composited parking card into small cards from large pieces.
6. Submit the punched parking card to the quality inspection department for quality inspection.
7. After quality inspection, send the parking cards to each department for processing, such as: marking the parking card, coding, or small gold or silver engraving on the parking card, etc.
8. Conduct a quality inspection of the parking card after completing the entire process.
9. After the parking card quality inspection is completed, 250 sheets are sealed with inner film and 250 sheets are packaged in small boxes, packed into outer boxes according to the customer's quantity. The outer boxes for parking cards are: 500 boxes, 1000 boxes, 3000 boxes, 5000 boxes, and 10000 boxes.
10. Ship according to customer requirements.
Fill in the information on the back of the parking card
1. This card can only be used in the XXXX underground parking lot ID system. Do not lend to others;
2. If the card is lost, lent, forged, altered, or damaged due to reasons attributable to the cardholder, or if other illegal use of the card results in personal injury, property loss, or any other consequences, the cardholder shall bear the responsibility;
3. Please carry this card with you and keep it safe. Do not leave it in the car. Any losses caused by failure to comply are your responsibility.
4. This parking lot only provides parking spaces for vehicles. If there is no safekeeping, please take good care of your vehicle and purchase insurance. Please be aware of precautions, lock your windows and doors, and keep valuables safe. Any losses are your responsibility.
5. If the card is lost or damaged and cannot be used normally, please promptly report loss and apply for replacements at the service center. A replacement fee of 50 yuan per card is required, and the service center's phone number is 18666911248



Get a quote plan
Just state your usage scenario and we can provide you with a quote! Thank you for your cooperation!
