RFID nylon wristband

Introduction to RFID nylon wristbands
An RFID nylon wristband actually refers to a nylon wristband combined with an ABS watch face. The nylon material is inserted into the ABS watch face, which can encapsulate various chips, thus creating the RFID nylon wristband. The most outstanding advantage of nylon wristbands is their superior wear resistance compared to all other materials—10 times stronger than cotton and 20 times more than wool. When stretched to 3-6%, nylon wristbands can achieve a 100% elastic recovery rate; It can withstand tens of thousands of twists without breaking without breaking. Nylon wristbands are 1-2 times stronger than cotton, 4-5 times stronger than wool, and three times stronger than other materials. However, nylon wristbands have poor heat and light resistance, and their retention is also poor. Overall, nylon wristbands are lightweight, highly wrinkle-resistant, breathable, and have good durability, dyeability, and heat setting.

RFID nylon wristband features
1. Specifications: nylon wristband length 280MM, width 25MM; ABS dial width 40MM, height 37MM (can also be customized by the customer)
2. Material: The strap is made entirely of nylon, making it attractive, durable, and easy to use. The dial is made of ABS material
3. Application Range: Widely used in swimming pools, cold storage, fieldwork, and other extremely humid environments, even under severe conditions like prolonged immersion in water, it can be used normally
4. Operating temperature: -10°C~+50°C
5. Colors: blue, red, black, yellow, green, orange, purple, pink, etc

RIF nylon wristband packaging method
1. Weight per piece: 9.85g per piece
2. Packaging: 100 pieces per OOP bag, 20 OPP bags per box, i.e., 2,000 pieces per box
3. Box dimensions: 410mm*410mm*350mm, box weight: 0.84kg each
4. Net weight: 19.7kg/box
5. Gross weight: 20.54g/box

RFID nylon wristbands can be packaged as chip types
Supports packaging of low-frequency chips (125KHz): TK4100, EM4200, T5577, Hitag 1, Hitag 2, Hitag S, etc
It can also package high-frequency chips (13.56MHz): FM11RF08, Mifare1 S50, Mifare1 S70, Ultralight, NTAG203, I-CODE2, TI2048, SRI512, and others.

Precautions for RFID nylon wristbands
1: Cannot package ultra-high frequency chips
Many manufacturers advertise that they can package RFID UHF chips, but this is an exaggerated marketing tactic. This nylon wristband cannot encapsulate UHF chips. Please pay attention to this: even if it is packaged, it cannot be used, because UHF requires very high environmental requirements and is close to the human body, greatly reducing UHF performance.